Ukulele Day 25 Lacquer

Here is what we apply the 1st layer of lacquer.

Normally, we apply 1 coat of lacquer and wait for about 12 hours, at least, to apply another layer.
We'd make sure that each layer is completely dried.

For every 2 lacquer layers, we need to sand the layer with water proof sanding paper 340 or 400 grit.
We use water and small amount of soap to easily sand it.

All we concern here is to adjust the lacquer layer. We don't need to sand out the whole layer.
Keep in mind, just adjust the lacquer layer.

We then apply another 2 lacquer layers (wait for 12 hours for each layer) and sand it again.
Do this until we satisfy the shinny surface.